Our Services
Three ways to evidence
and reduce your environmental risk.
One independent partner. Every report defensible for due diligence, SLA, warranty and insurance review.
01 · Onsite Scan · Thermal Profiling
Data Center Thermal Mapping
A high-resolution thermal sweep of every rack-intake row. Dual IR and air sensors capture hundreds of readings per row in a single fast pass, graded against the ASHRAE TC9.9 recommended 18–27 °C envelope — surfacing both overheating and over-cooling, and the localised hot and cold spots fixed sensors would miss. Because reaction rates roughly double for every 10 °C rise, a hotspot is also where any corrosive or particulate contamination measured under our ANSI/ISA-71.04-2013 and ChlorAir™ programmes will do the most damage fastest — making thermal mapping the context that turns a chemistry result into an actionable risk.
02 · Onsite Scan · Humidity Profiling
Data Center Humidity Mapping
A fast RH sweep of every rack-intake row. A single-pass probe maps inlet humidity against the ASHRAE ≤ 60 % RH recommendation and the deliquescence relative humidity (DRH) of chloride salts, which sits near 57 % RH — noticeably lower than the ~70 % RH threshold used for many other airborne contaminants. Below that point, deposited salts stay dry and inert; cross it, and the same deposit turns into a conductive electrolyte and corrosion accelerates. This scan flags the local humidity spikes — and rooms already living above the chloride DRH — that drive localised spot corrosion long before fixed sensors would notice, and pairs directly with the ISO 8502-9 chloride results from our ChlorAir™ and CorrDust™ kits.
03 · Onsite Audit · Full Risk Review
Environmental Compliance Audit
Your most thorough due-diligence record. A short onsite EnviroScanner visit measures temperature, cooling airflow and air quality at your rack intakes — the same thermal and humidity sweeps offered above, extended with corrosive and particulate contamination readings. Results are graded against ASHRAE TC9.9 thermal guidelines, ANSI/ISA-71.04-2013 severity classes G1–GX, and ISO 14644-1 particle limits. Encrypted data is processed by our Swiss lab into a certified, standards-referenced report — the document you put in front of an auditor, insurer or board.